SPECIFICATIONS

Brand Name: NoEnName_Null

Origin: Mainland China

Is Smart Device: no

Type: Bathtub Handle

Features: Adjustable

Manufacturer Warranty: 2 Years

Color: Black

Number of Handrails: 1

Product Size: 46.7*11.3*120-156cm (18.39*4.45*47.24-61.42inch)

Material: The Upper Part Is Made Of Aluminum, And The Lower Part Is Painted With Steel Pipe

Product Parameters:

Product Size: 46.7*11.3*120-156cm (18.39*4.45*47.24-61.42inch)

Material: The Upper Part Is Made Of Aluminum, And The Lower Part Is Painted With Steel Pipe

Regarding Load-Bearing, It Is Just a Handrail. If It Is Installed Firmly, It Has Strong Load-Bearing Capacity.

Product Features:

1.Universal To All Spa Tubs.

2.Coated Strong & Steady Support Foot, Coated Aluminum Handrail To Avoid Rust

3.304 Stainless Steel Screws. Easy Installation.

Installation Steps:

1> Choose Your Favourite Position Of The Tub, Push The Flat Foot Under The Tub. Twist 6 Wood Screws On The Ground Through The Holes On The Foot.

2> Put The Pvc Stopper To The Middle Of The Connecting Tube, And Put The Connecting Tube Into The Support Feet Until The Stopper Meet The Top Of Support Foot.

3> Put The Square Cover (Cabinet Connecting Kit) On The Connecting Tube Until It Slide On The Pvc Stopper, 2 Half Round Holes Should Face The Cabinet.

4> Put The Handrail On The Connecting Tube, Choose The Suitable Height By Moving The Pvc Stopper, Fasten The Pvc Stopper By 4 Tek Screws Finally.

5> Put The Flat Plate (Cabinet Conecting Kit) On The Tub Wall To Face The Square Cover, Tighten It On The Tub Wall By 4 Wood Screws. Twist 1 Set Of Nut & Washer To The Bottom Of Shafts, Let The 2 Shafts Meet The 2 Half Round Holes.

6> Twist The 2nd Sets Nuts & Washer On The 2 Shafts, Twist All The Nuts (In & Out Of Square Cover) To Fasten The Square Cover.

7> Fasten The Cover With Tube Through The Screw Hole On The Cover By 1 Tek Screw, And Fasten The Hand Rail With Connecting Tube By 3 Tek Screws Through The 3 Holes On The Handrail.

8> Push The Big Plug On The End Of Handrail, All Small Black Caps On All The Screw Heads, Assemble Completed.

Packing List:

Cabinet Free Support Bracket*1

Handrail Tube*1

Cabinet Bracket*1

Pvc Pivot Stopper*1

2/5" Nuts（m10）*4

2/5" Washers*4

Foam Grip*1

Tube End Cap*1

1" Black Tek Screw（5* 18mm）*6

1" Wood Screw（5* 30mm）*10

Black Pvc Push Cap*12

Phillips Driver（5* 60）*1

Drill Bit（3.2mm）*1